Still having trouble accessing some microsoft pages though, same problem I had with the PPTP VPN before, on the older routers with an older build of DD-WRT.I have placed my ooma telo behind my linksys wrt54g (dd-wrt firewall - Firmware: DD-WRT v24-sp2 (10/10/09) vpn). I'm using my PPTP VPN from a friend's house. "DD-WRT v24-sp2 (04/13/11) mini - build 16785"Įdit: I guess rebooting the router a few times helped. But it doesn't work.Įdit: Using build 16785. I put in the same info that I had in the older DD-WRT router. I enabled the PPTP VPN server in the DD-WRT router. Only, I cannot seem to figure out what that setting is supposed to be.Įdit: Just tried leaving it blank, that doesn't work either. Then in the DD-WRT router, I have my UPnP and static port forwards. I have a Verizon router at 192.168.1.1, and have its DMZ set to 192.168.1.2, my DD-WRT router. I tried just IP addresses, 192.168.1.1 (my main FIOS router from Verizon), 192.168.1.2 (my primary DD-WRT router's WAN IP address), 192.168.2.1 (my primary DD-WRT router's LAN IP address), and even 192.168.2.0/24. I can't seem to figure out what to put in there to make this work. New version of DD-WRT, on my new WNR2000v2 routers, has an additional parameter. Just list external port, TCP/UDP/BOTH, internal IP, and internal port. Click the Cancel Changes button to cancel your unsaved changes.My old WNR834Bv2 router, had an older version of DD-WRT, and it was easy to port-forward. Set this to what the application requires.įorward only if sender matches this ip/net (example 192.168.1.0/24).Įnter the number of the external port (the port number seen by users on the Internet).Įnter the IP Address of the PC running the application.Įnter the number of the internal port (the port number used by the application).Ĭlick the Enable checkbox to enable port forwarding for the application.Ĭheck all values and click Save Settings to save your settings. To remove the last rule, click Remove.Įnter the name of the application in the field provided.Ĭhose the right protocol TCP, UDP or Both. To add a new Port Forwarding rule, click Add and fill in the fields below.
0 kommentar(er)
